Harsh over bumps
The bike feels stiff and jarring when hitting road imperfections.
Common causes
Several causes can produce the same feeling. These are possibilities, without a ranking for your bike.
Tire pressure incorrect
Harshness started with a pressure or tire change; the tire is the first spring a bump meets, so too much air reads as stiff suspension
Tire condition or construction
Tires are old, squared, cupped, stiff, or recently replaced
Front compression damping may be too firm
The first hit is sharp but the fork is otherwise controlled.
Rear compression damping may be too firm
The sharp hit comes through the seat.
Front rebound damping may be too slow
The fork becomes progressively harsher over repeated bumps
Rear rebound damping may be too slow
The rear packs down over repeated bumps
Front preload may be excessive
Front sag is too small or the fork rides high
Front preload may be too low
The front sits deep in its travel, so bumps are met in the firmer end of the stroke
Rear preload may be excessive
Rear sag is too small for the current load
Rear preload may be too low
The rear sits deep in its travel, so bumps are met in the firmer end of the stroke
Fork friction or service condition
Small bumps come straight through the bars, sticky seals, worn bushings or tired fork oil resist before the spring can move
Shock friction or service condition
Small bumps come straight through the seat, a sticky shock shaft, tired shock oil or a dry linkage, if the bike has one, resists before the spring can move
Front spring rate may be too stiff for you
Even at minimum preload and damping the front rides high and skips over sharp hits instead of absorbing them
Rear spring rate may be too stiff for you
Even at minimum preload and damping the rear rides high and skips over sharp hits instead of absorbing them
Rear spring rate may be too soft for you
Sag is set but sharp hits still jar, a soft spring rides deep in its travel, so a big bump reaches the hard end of the stroke
Front spring rate may be too soft for you
Sag is set but sharp hits still jar the bars, a soft fork spring rides deep, so a big bump reaches the hard end of the stroke
What the adjusters do
Preload changes how far the suspension settles under the bike and its load. It does not change the spring rate.
Compression damping controls how quickly the suspension compresses. Rebound damping controls how quickly it extends again.
Why the answer depends on your bike
Bikes have different adjusters. Some settings cannot be changed on every bike. Your weight, passenger, luggage and riding conditions also affect how the suspension behaves.
Find your bike's suspension specifications to see its published adjusters.
All handling symptoms · Suspension basics
The app ranks these for YOUR bike's adjusters
MotoSetGo matches the causes to your bike, load and riding. 30 day trial, no card up front.